MAMBA MONSTER265kv MOTOR (BEST FOR BUGGIES) | CC-010-0062-02

Castle has used all of their tricks to deliver stunning power for monster trucks and 1/8th buggy conversions.The Mamba Monster handles up to 6S LIPO input (25.2 Volts MAX). It has a switching BEC circuit onboard to provide plenty of power for your receiver and servos (5.5v fixed output). Don't worry about the amp rating, nothing even comes close to the real world performance of the Castle controllers, and Mamba Monster is no exception. We've hit 60 mph with RC vehicles that have absolutely no business doing 60 mph. (And we were doing it in a 20 mph zone!).Mamba Monster is designed to keep its cool while it pounds your truck. Castle refused to cut corners on the design or the components, the electronic and thermodynamic fundamentals are right to begin with. Castle then wrings a bit more power out by using a high efficiency heat sink PLUS an integrated cooling fan to make sure you finish the race. Thermals are for the other guys. Mamba Monster ESCs come with huge 6.5mm gold plated bullet connectors for reliable power transfer and simple installation.

• Based on Steve Neu's awesome 15 series motor, the Neu-Castle 2200 and 2650 are works of mechanical art. They both feature high quality oversized bearings, sintered Neodymium magnets, superior electromagnetic design, and rigorous engineering control in our own factory resulting in a Monster motor we can put our name on.
• The efficiency of a motor determines its quality. Higher efficiency means better design and high quality components. The higher the efficiency of the motor the more power it can produce before it overheats.
• Mamba Monster systems typically pull 4,000-5,000 watts (5 to 6 horsepower) under acceleration. The Neu-Castle motors are some of the highest efficiency motors that we have ever tested; they are up to 85%+ efficient on our test rig.

• It's always better to reduce the heat generated in an electric power system is by better engineering than to try and cool things with fans and other gimmicks. Sure, a fan can get you a few degrees, but it is much better to have a superior design to begin with.
• Neu-Castle 2650 KV – Intended for 4S (16.8 Volt) operation. Ideal for 1/8th buggy conversions. The 2650 is 68mm long.

• Max Input Volts: 16.8
• Amp Rating*: 120
• Weight: 370g (13.1 oz)
• Motor Diameter: 39.98mm
  41.78mm with fins
• Motor Length: 68mm
• Shaft: 5mm
• Bearings: Oversize ABEC-1 front and rear
• Connector: 6.5mm
• Note: Motor wires OK to shorten