INVERZA 33 ARF | HAN4925

From a project that began as a "what if" with acclaimed full-scale builder Kevin Kimball and Quique Somenzini, the Inverza is a contemporary concept designed to harness the power of the radial engine with the potential only possible in a monoplane platform. For the finishing touches, Mirco Pecorari shared his expertise by complementing the modern concept with a stunning color scheme.

Covered in genuine UltraCote®, its balsa/balsa-plywood structure is strong and light, while Mirco Pecorari's original color scheme offers stunning looks, incredible ground presence and high visibility in the air. Its two-piece wing connects with a carbon fiber wing tube and the ailerons and elevators are pre-hinged with a tight seal so you can get flying faster. The oversized hatch features a tinted canopy, scale instrument detail and an ideal location for the pilot figure of your choice. Other great features include a factory painted aluminum landing gear, plus a factory painted fiberglass cowl and matching wheel pants.

• Quique Somenzini design
• Generous wing area for an extra-light wing loading
• Oversized control surfaces for superior slow speed maneuverability
• Engineered to fly upright, inverted and knife-edge without mixing
• Vivid Mirco Pecorari color scheme with genuine UltraCote® covering

• An evolutionary original design purpose built for modern precision and 3D aerobatics
• Durable aluminum landing gear with painted finish
• Two-piece, plug-in wings with carbon fiber tube joiner
• Lightweight balsa/balsa-plywood construction

• Pre-hinged control surfaces
• Pre-set and drilled for the Evolution® 33GX gas engine
• Tinted canopy and cockpit instrument detail (pilot optional)
• Electric power system conversion kit—sold separately

• Flying Weight: 12.3–13.0 lb (5.60–5.90kg)
• Recommended Fuel: Gasoline
• Motor Size: Power 180
• Speed Control: 80+ amp high-voltage brushless ESC
• Approximate Assembly Time: 15–20 Hours
• Control Throw (Ailerons): Low: 50mm up/down, 40% expo; High: 95mm up/down, 45% expo

• Control Throw (Elevator): Low: 8mm up/down, 20% expo; High: 50mm up/down, 45% expo
• Control Throw (Rudder): Low: 15mm right/left, 15% expo; High: 40mm right/left, 40% expo
• Main Wing Tube Length: 800mm
• Main Wing Tube OD: 25mm
• Recommended Motor Battery: 37.0V 10S 4400-5000mAh Li-Po pack

• Recommended Receiver Battery: 2150mAh 6.0V 5-cell Ni-MH receiver pack
• Spinner Size: 3.0 in (76mm) P-51 style
• Tail Wing Tube Length: 360mm
• Tail Wing Tube OD: 12.7mm
• Wing Loading: 25.1 oz/sq ft (76.6 g/sq dm)
• Wingspan: 75.0 in (190 cm)

Radio Equipment

• 6+ channel programmable transmitter
• 6+ channel receiver
• 5 × high-torque standard servos

Gas Setup

• 30-35cc 2-stroke gas engine
• Propeller
• Spinner
• Standard servo (for throttle)
• Chargeswitch
• Ignition pack
• Receiver pack
• Pilot figure (optional)

Electric Setup

• Power 180 motor
• EP motor mount (HAN492515)
• 80+ amp high-voltage brushless ESC
• BEC
• Propeller
• Spinner
• 37.0V 10S 4400-5000mAh flight pack
• Charger for flight pack
• Pilot figure (optional)